姓名：Qin Qinghua（秦庆华）
学位：PhD(博士)
职称：Professor(教授)
电话：0755-28323312
办公：Main Building 415(主楼415)
邮箱：qinghua.qin@smbu.edu.cn
一、个人简介
秦庆华博士目前是深圳北理莫斯科大学教授和前沿交叉技术研究院院长。在华中科技大学获得力学专业硕士和博士学位。博士毕业后留在华中科技大学从事教学和科研工作。1994年获得DAAD/K.C. Wong研究基金，在德国斯图加特大学（University of Stuttgart）开展9个月的科研工作。1995-1997年在清华大学开展博士后研究工作。1997年获得伊丽莎白女王二世基金（Queen Elizabeth II fellowship）在悉尼大学开展研究，1998年获得澳大利亚科学院J.G. Russell奖。2001-2006年以天津大学为依托单位获得中国教育部长江学者讲座教授。2002年获得澳大利亚研究委员会教授基金及主持过多项澳大利亚国家面上基金，2006年至2021为澳大利亚国立大学教授。秦教授目前主要从事结构材料和功能材料的设计及性能研究。2009-2021担任澳大利亚国立大学工程研究中心材料加工制造组组长及学科带头人，2011-2013担任澳大利亚国立大学工学院副院长。2007获选澳大利亚工程师学会高级会员。从2016年起连续列为爱思维尔中国高被引学者。2020年起入选斯坦福大学发布的世界800万学者之中前2%的顶尖科学家排行榜名单。此外，发表SCI收录期刊论文400多篇出版英文专著9部。
1.Biography-Short Description
Dr. Qin Qinghua is a Professor and Dean of the Institute of Advanced Interdisciplinary Technology at Shenzhen MSU-BIT University. He received both his master’s and doctoral degrees in applied mechanics from Huazhong University of Science and Technology, where he also began his academic career in teaching and research. In 1994, Dr. Qin was awarded the DAAD/K.C. Wong Research Fund, enabling him to conduct research at the University of Stuttgart, Germany. From 1995 to 1997, he pursued postdoctoral research at Tsinghua University. His academic excellence was further recognized with the prestigious Queen Elizabeth II Fellowship in 1997, which supported his research at the University of Sydney. In 1998, he received the J.G. Russell Prize from the Australian Academy of Science. Between 2001 and 2006, Dr. Qin held the Changjiang Scholars Chair Professorship, sponsored by the Ministry of Education of China, with Tianjin University as the supporting institution. In 2002, he received the Australian Research Council Professorial Fellowship and led a number of national research projects in Australia. From 2006 to 2021, he served as a Professor at the Australian National University, where he led the Materials and Manufacturing Group (2009–2021) and was Deputy Dean of the School of Engineering (2011–2013). Dr. Qin’s research focuses on the design and performance evaluation of structural and functional materials. He was elected a Senior Member of the Institution of Engineers Australia in 2007 and has been recognized as an Elsevier China Highly Cited Scholar since 2016. Since 2020, he has been listed among the world’s top 2% of most influential scientists, as identified by Stanford University. He has authored over 400 SCI-indexed journal papers and nine English-language monographs.
Qualifications
1982 BEng in Mechanical Engineering, Xi’an Highway University, Xi’an,
Thesis: Design for a 20T-concrete rotary mixer, Bachelor thesis
1984 MSc. in Applied Mechanics, Huazhong University of Science and Technology (HUST), Wuhan
Thesis: Finite element analysis of aluminium electrolyzer structures
1990 PhD in Applied Mechanics, Huazhong University of Science and Technology, Wuhan,
Thesis: Variational principles, finite element and boundary element analysis for finite deformation of plates and shells
2001 Graduate certificate in Management Communication, NSW Technical and Further Education Commission
2008 Graduate certificate in Higher Education, ANU
Scholarships and Awards
1994 DAAD/K.C. Wong fellowship awarded by DAAD, Germany
1995 Postdoctoral fellowship awarded by the Ministry of Education of China
1996 Visiting Scholarship sponsored by the University of Sydney, Australia
1997 Queen Elizabeth II Fellowship, awarded by the Australia Research Council (ARC) (awarded to only 15 individuals worldwide)
1998 J.G. Russell Award, awarded by the Australian Academy of Science, Australia
2000 Guest Professor, awarded by Huazhong University of Science and Technology, China
2001 Cheung Kong Professorship, awarded by the Ministry of Education of China
2001 Natural Science Prize (2nd grade), awarded by the Ministry of Education of China
2002 ARC Professorial Fellowship, awarded by the Australia Research Council (awarded to only 15 individuals worldwide)
2007 Endeavour Executive Award, awarded by Department of Education, Science, and Training, Australian Government
2012 Top Supervisor award from Australian National University, Australia
Employment
2023~ Dean, Institute of Advanced Interdisciplinary Technology, SMBU
2021~ Professor, Department of Materials, SMBU, China
2011~2013 Associate Dean (Higher Degree Research), College of Engineering and Computer Science (CECS), ANU
2009~2021 Head of Materials and Manufacturing Group, RSE, ANU
2006~2021 Professor, RSE, ANU
2005~2006 ARC Professorial Fellow and Professor, RSE, Australian National University, Australia
2001 ~ 2005 Cheung Kong Professor, Department of Mechanics, Tianjin University, China
1997 ~ 2002 ARC QE II Fellow, School of AMME, University of Sydney, Australia
1995 ~ 1997 Postdoctoral fellow, Dept. of Eng. Mechanics, Tsinghua University, Beijing, China
1984 ~ 1995 Lecturer, Department of Mechanics, HUST, Wuhan, China
Visiting Appointments
1994 (Feb-Oct) DAAD/K.C. Wong research fellow, Institute of Computer Applications, University of Stuttgart, Germany
1996 (May-Oct) Visiting Scholar, Dept. of Mechanical Engineering, University of Sydney, Australia
Teaching and Research Areas
Courses taught
· ENGN 3810 Biomechanics and Biomaterials
· ENGN 3601/6601 Engineering Materials
· ENGN 4511/6511 Composite Materials
· ENGN 4615/6615 Finite Element Analysis/Computational Engineering
· ENGN 8101 Modelling and Optimization
· ENGN 8104 Research Project (co-ordinator)
· ENGN 8170 Group Project
Research areas
· Computational Engineering
· Finite and Boundary Element Method
· Multifield Materials and Structures
· Fracture and Damage Mechanics
· Biomechanics and Biomaterials
· Composite Materials
· Metamaterials
· Nanomechanics
· Additive Manufacturing
· Welding technology
Research Grants
1) Projects in which I am Lead CI
1995 Chinese Education Committee Foundation for Scholars returning from abroad, on “Fracture mechanics of piezoelectric materials” (REM$25,000)
1996 Chinese Education Committee Postdoctoral Foundation, on “Interfaces and their influences on piezoelectric composites” (REM$5000 & US$1000)
1997 ARC Queen Elizabeth II Fellowship project on “Theoretical and experimental studies on the micro-defect-weakened- piezo- thermoelastic materials”, (1997-2001, AU$388608, Grant No. F89700665)
1999 ARC Institutional small grant, on “Dynamic fracture and damage analysis of piezoelectric and functionally gradient materials” (AU$17,000)
2000 ARC large grant, on “Thermo-electro-mechanical analysis of advanced microelectronic packages” (2000-2002, AU$192,836, Grant No. A10009133)
2001 Sesqui R&D Scheme of the University of Sydney, on “Thermoelectroelastic analysis of bone remodelling process” (AU$26,000)
2002 ARC Discovery-Project (Professorial Fellowship), on “Thermo-electro-chemo-mechanical properties of biological systems” (2002-2006, approved funding: AU$686,825; Actually received $741657, Grant No. DP0209487)
2002 Tianjin University Key project ‘21st Century Education Promotion programme’, on “Study on mechanics of smart biomaterials” (with YL Kang, 2002-2006, RMB$2million)
2004 ARC Discovery-Project, on “Rheological and electrical properties of biological soft tissues” (2004-2006, AU$249,000, with Z Liu and Y Yu, DP0451097)
2005 National Natural Science Foundation of China, Equivalent multi-field theory and mechanical behaviour of piezoelectric biomaterials (Grant No. 10472082; 2005-2007: RMB$290,000)
2005 Faculty Research Grant Scheme of FEIT, ANU for new start on “Thermoelectroelastic theory of bone remodelling process” (AU$5000)
2006 ARC Discovery-Project, on “Theoretical and experimental studies on magnetoelectroelastic bone remodelling process” (2006-2008, AU$260,000, with S Kalyanasundaram, DP0665941)
2007 AIS – Scholarship Agreement on “Optimisation of a respiratory gas analysis system for use with high-performance athletes” (2007-2008, $24000)
2008 Australian Leadership Awards Fellowship Grant on “A study of challenging mechanics problems in exploiting water power”, Australian Agency for International Development (AusAID), Fund provider Ref No. 46118 (2008, $28160)
2013 ARC Linkage Project, Rapid process development for the assembly of lightweight metal components, (Grant No. LP130101001, 2013-2016, AUD$310,000, with Matthew C Doolan, Paul Compston, Michael J Cardew-Hall, Richard A Taube)
2013 ARC Discovery-Project, Finite element and optimization methods for creating complex structure in additive manufacturing (Grant No. DP140103137; 2014-2016; AUD$380,000; with Prof Roderick Boswell)
2015 ARC Discovery-Project, Topology optimisation of mechanical metamaterials with additive manufacture (Grant No. DP160102491; 2016-2018; AUD$340,000; with Dr Zhen Luo; total ARC funding received: $357,122.92)
2013 National Natural Science Foundation of China, Interfacial mechanics and optimization approach for biological coating materials in additive manufacturing (Grant No. 11372100, 2014-2017, RMB$900,000)
2016 ANU Major Equipment Committee Grant on “Designable User-Based Laser Sintering Facility: Additive Manufacturing of Advanced Materials” (2016, AU$142,000, with Rachel W. Li, Paul N. Smith, Yuan Chai, Khu Vu; MEC grant number: 16MEC30)
2017 National Natural Science Foundation of China, Mechanical analysis and optimization of elastic metamaterials for vibration and seismic wave attenuation (Grant No. 11772204, 2018-2021, RMB$680,000)
2022 National Natural Science Foundation of China, Mechanical design of ultra-low frequency tunable acoustic metamaterials based on multi-level structural buckling (Grant No. 12272239, 2023-2026, RMB$550,000)
2) Projects in which I am a Partner Investigator or non-lead CI
2007 CityU Strategic Research Grant on “Theoretical Study on Cancellous Bone Modelling and Remodelling under Electro-magneto-elsatic Field” (City University of Hong Kong, No. 7002076; Apr 1 2007–Mar 31, 2009; Principle Investigator: Xiaoqiao He, Co-Investigator: Qinghua Qin; HK$179,464)
2007 ANU Major Equipment Committee Grant on “Mechanical test facility for microtesting of biological/nanostructured materials” (2007, AU$186,876, with A Lowe, S Kalyanasundaram, and RE Williamson; ANU file No. 200711619; MEC grant number: 07MEC11)
2009 ANU Major Equipment Committee Grant on “A couple micro-/nano-scale imaging and polarisation charactersation facility” (2009, AU$400,000, with Y Liu, RL Withers, JW White, R Welberry, RP Wang, DJ Goossens, MG Humphrey, L Fu; MEC grant number: 09MEC21)
2012 National Natural Science Foundation of China, on Mechanics on chirality transfer in nanomaterials with hierarchy of chirality (Grant No. 11272230; 2013-2016; RMB$880,000; with Dr Jianshan Wang and Dr Hui wang)
2013 ARC LIEF Grant, An Australasian facility for the automated fabrication of high performance bespoke components (Grant No. LE140100082, AUD$500,000 for 2014; with Prusty, A/Prof Gangadhara B; Compston, A/Prof Paul; Tong, Prof Liyong; Kwok, Prof Kenny C; Fox, A/Prof Bronwyn L; Tang, Dr Youhong; Ojeda Rabanal, Dr Roberto E; Bhattacharyya, Prof Debes; St John, Dr Nigel A; Beehag, Dr Andrew; Sterbic, Mr Mark; Uy, Prof Brian; Sahajwalla, Prof Veena; Pearce, Dr Garth; Morozov, Prof Evgeny V; Ye, Prof Lin; Rasmussen, Prof Kim J; Mashiri, Dr Fidelis R; Das, Dr Rajarshi; Wildy, Dr Stuart J)
Professional Societies and Service Record
1) Editorial boards
· Editor-in-Chief, International Journal on Engineering Applications (2013-)
· Editor-in-Chief, AIMS Materials Science (2019-)
· Editor-in-Chief, Current Mechanics and Advanced Materials (2019-2023)
· Member of editorial board, Acta Mechanica Sinica (2021-)
· Member of editorial board, Journal of Engineering Mathematics (2021-2025)
· Member of editorial board, Functional Materials Letters (Sep 2018-)
• Member of editorial board, Acta Mechanica Solida Sinica, (2011-)
· Member of editorial board, Engineering Analysis with Boundary Elements, (2012-)
· Co-Chief Editor, Book Series on Advanced Materials and Mechanics, Higher Education Press and Springer, (2010-)
· Guest Editor, Special Issue on “BEM in China”, Engineering Analysis with Boundary Elements, 28(8), 903-995, 2004
· Guest Editor, Special Issue in Celebration of Professor Shouwen Yu's 70th Birthday with W Yang and XQ Feng), Acta Mechanica Solida Sinica, 22(5), 377-509, 2009
2) Professional services
· Fellow, Institution of Engineers Australia (elected in 2007-2018)
· Chair, National Conference on Smart Materials & Structures, Tianjin, China, 10-12 April, 2003
· Member of International Scientific Committee of the Global Chinese Workshop on Boundary Element and Meshless Methods, 4th-6th September 2003, Qinhuangdao, China
· Member of Advisory Committee, 9th International Conference on Inspection, Appraisal, Repairs and Maintenance of Structures, 19th-21st October 2005, Fuzhou, China
· Member of Scientific Committee, the 5th International workshop on Trefftz Methods, March31~April 1, 2008, Leuven, Belgium
· Assessor for Marden Fund Council of New Zealand (2003, 2004);
· Int-reader for ARC (expert assessor of international standing), 2005-
· Assessor of Changjiang Scholar Programme for the Ministry of Education of China, 2007
· Assessor of National Natural Science Foundation of China, 2008
· Co-Chair, Workshop on Damage, Fracture and Micro/Nano Mechanics (WDFM-2009), August 20-22, 2009, Beijing, China (Chairmen: Wei Yang, Xiqiao Feng, Qinghua Qin)
· Member of International Organizing Committee, The Third Asia-Pacific International Conference in Computational Methods in Engineering 2009 (ICOME2009), October 18-20, 2009, Nanjing, China.
· Member of Local Academic Promotions Committee, College of Engineering and Computer Science, ANU, 2009
· Member of the Engineering Curriculum Development Committee, College of Engineering and Computer Science, ANU, 2010~2013
· Member of the College Research Committee, College of Engineering and Computer Science, ANU, 2011~2013
· Member of the College Education Committee, College of Engineering and Computer Science, ANU, 2011~2013
· Member of Scientific Advisory Committee, International Conference on Boundary Element and Meshless Techniques, 12-14 July 2010, Berlin, Germany
· Member of Scientific Advisory Committee, the 2nd International Conference on Nanomechanics and Nanocomposites, October 10-13, 2010, Beijing, China
· Member of IAS Working Group, College of Engineering and Computer Science, ANU, 2010
· Member of Scientific Advisory Committee, 12th International Conference on Boundary Element Techniques, 13-15 July 2011, Brasilia, Brazil
· Member of Scientific Committee, Joint International Workshop on Trefftz Method VI and Method of Fundamental Solution II, National Sun Yat-sen University, Kaohsiung, March 15-18,2011
· Member of Scientific Committee, Global Chinese Workshop in conjunction with 10th National Conference on Computational Methods in Engineering, May 25-28, 2012, Changsha, China
· Member of Local Organizing Committee, The 4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 July 2013, Gold Coast, Australia
· Member of International Organization Committee, 4th Asia Pacific Congress on Computational Mechanics & 2nd International Symposium on Computational Mechanics, 11 – 14 Dec. 2013, Singapore.
· Member of Scientific Advisory Committee, the 14th International Conference on Boundary Element and Meshless Techniques, 16-18th July 2013, Paris, France
· Member of International Scientific Committee, the 13th International Conference on Fracture (ICF13), June 16–21, 2013 in Beijing, China (Session chair: Session 33, Multi-field Coupling)
· Member of International Scientific and Advisory Board, The 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Johor Bahru, Malaysia on 4 – 6 December 2013.
· Member of International Scientific Advisory Committee, 36th International Conference on Boundary Elements and Other Mesh Reduction Methods, 22 - 24 October, 2013, Dalian, China
· Member of Organisation Committee, First Australasian Conference On Computational Mechanics (3-4 October 2013, Sydney),
· Member of International Scientific and Advisory Board, 1st Internatonal Materials, Industrial, and Manufacturing Conference (MIMEC2013) Johor Bahru, Malaysia, December 4-6, 2013
· Co-Chair, iSoGO Symposium on Interdisciplinary Computation and Optimization; December 20-25, 2014, Huangshan Hot Spring Hotel, The Yellow Mountains, China
· Member of International Organization Committee, The 5th International Conference on Computational Methods (ICCM2014), Cambridge, England, July 28, 2014 – July 30, 2014
· Member of International Scientific Committee, ICOME2015, The 5th Asia-Pacific International Conference on Computational Methods in Engineering and the 11th Chinese National Conference on Computational Methods in Engineering; Joint International Conference on Trefftz Method VII and Method of Fundamental Solutions III, Hangzhou, China, October 11-13, 2015
· Member of International Scientific Committee, International Conference of Emerging Trends in Applied Mathematics and Mechanics, May 30 - June 3, 2016, Perpignan, France
· Member of Scientific Committee, The 2nd Australasian Conference on Computational Mechanics, Brisbane, Nov 30 to Dec 1 2015
· Member of International Scientific Committee, The 6th International Conference on Computational Methods, July 14-17th, 2015, Auckland, New Zealand.
· Member of International Organizing Committee, the First International Conference for Sustainable Development and Management (ICSDM), 28-30 June 2015, Hong Kong
· Co-Chair, International Conference on Advances in Construction Machinery and Vehicle Engineering 2015, 18-20 September 2015, Xi’an, Changan University, China
· Program Committee Chair, 2016 International Conference on Design, Mechanical and Material Engineering (D2ME 2016), September 8-10, 2016 Auckland, New Zealand
· Co-Chair, 2017 2nd International Conference on Design, Mechanical and Material Engineering (D2ME 2017), Melbourne, Australia, from September. 7-10, 2017
· Co-Chair, Symposium on Interdisciplinary Computing and Optimization (SICO-2017) July 21-25, 2017, Federation University, Ballarat, Australia
· Co-Chair, 2018 3nd International Conference on Design, Mechanical and Material Engineering (D2ME 2018), Phuket, Thailand, from September. 27-29, 2018
· Honorary Chair, 2020 4th International Conference on Material Engineering and Advanced Manufacturing Technology (MEAMT 2020) will be held in Seoul, Korea on 20-22, July 2020
· Chair, 6th International Conference on Materials Science and Manufacturing Engineering (MSME 2025), Sydney, Australia, January 22-25, 2025
· Papers reviewed for more than 20 international journals
Professor Qin’s list of publications can be accessed via this link
